Get 6 Months To Pay On Purchases of $99 or More with
Get 6 Months To Pay On Purchases of $99 or more with
The Leader in GX Honda & Chinese OHV Performance
The leader in GX Honda & Chinese OHV Performance
Use to Replace Valve Cover and Shroud Bolts or to Attach Linkage Plate to Motor
Use to Attach Mikuni and 390 Carb Manifolds to Blocks
Use to Assemble Carbs (390 Mikunis) to Intake Manifold. Requires Locking Nuts (Not Included).
M8x30mm Allen Head Bolt
Use with 3/8" Bolt to Seal Hole When Removing Oil Sending Unit. Sold Individually.
M8x25mm Allen Head Bolt
Use to Plug Switch Hole Cover in Shroud When Switch Is Not Used
1/4" Self-Tapping Bolt with 10mm Head for Governor Rod Hole
Use to Replace Studs When Using Open Element Air Cleaner Adapters. Will Work with QMA Type Adapters and Manifold Spacers.
3/8" Self-Tapping Bolt for GX270 & GX390 Governor Holes, 10mm Head
Use for Custom Air Cleaner Assemblies
Genuine Honda 6x10 Bolt for GX120, GX160, GX240, & GX390
Pair of Solid Case Dowels for GX120-GX390, 212 Predator, and BSP "Clone". Reduces Case Flex.
Genuine Honda Part!
Use to Replace Studs When Using Velocity Stacks with Manifold Spacers (Pulse Fitting)
Genuine Honda Rod Bolt for GX160 UT2
Use to Assemble 390 Carbs (Including Insulator) with Air Filter Adapter to Manifold
ARC Rod Bolt Set for GX200s, BSP "Clones", and 212 Predator Rods
Replacement for 4.451 (Vegas Carts) GX490/460 Connecting Rods
Replacement Bolts for GX270 & GX390 ARC Rods
Includes new high strength bolts and washers for head and side cover. Use only if studs not allowed.
