Lightweight Hose for Adapting 32/34mm Mikunis to NR Racing GX390 Aluminum Manifolds

Used to Adapt Mikuni Flat Slides to Manifolds. Use for 24/28mm.

Lightweight Hose for Adapting 32/34mm Mikunis to NR Racing GX390 Aluminum Manifolds. 45 Degree.

Adapter for Mounting 24 & 28mm on NR Racing Tube Style GX270 Manifolds

Adapter for Mounting 33 & 34mm Mikunis on NR Racing Tube Style GX200 Manifolds

Adapts Mikuni Flat Slides to Manifolds. Use for 24/28mm. Mounts Carb to Motor at 45 Degree Angle.

Mikuni 22mm Carb to GX200 Intake Manifold. Also Adapts GX390 and Most Flanged Carbs.

Used to Adapt 24/28mm Mikuni Flat Slides to GX200 Manifolds

Adapter for Mounting 38/40mm Mikunis on NR Racing Tube Style Manifolds

Used to Adapt Mikuni Flat Slides to Manifolds, Use for 24/28mm

Adapter for Mounting 33/34mm Mikunis on NR Racing Tube Style Manifolds. Straight Mount.

Adapts Mikuni Flat Slides to Manifolds, Use for 33/34mm

Adapter for Mounting 33/34mm Mikunis on NR Racing Tube Style Manifolds at a 45 Degree Angle

24mm Flat Slide Mikuni (and 24mm Keihin) to GX200 Intake Manifold

33/34mm Flat Slide Mikuni to GX270 and GX390 Intake Manifold

Mikuni 22mm Carb to GX200 Intake Manifold. Also Adapts GX390 and Most Flanged Carbs. Short Style.

Intake Manifold, Mikuni 22mm Carbs to GX200. Also Adapts GX390 and Most Flanged Carbs.

Inverted 22mm Mikuni Intake for Mini Bikes and Other Custom Applications. Mounts 22mm to GX200, BSP Racing "Clones", & 212 Predators

Steel Intake Manifold to Mount 22mm Mikuni Carbs to GX200. Manifold Is Curved to Allow Carb to Face Rear.

Intake manifold designed to match the Moflow1 intake port.

-Pre-tapped for 1/8npt pulse fitting. (used instead of the crankcase for the fuel pump pulse).

Intake manifold designed to match the Moflow1 intake port.

-Pre-tapped for 1/8npt pulse fitting. (used instead of the crankcase for the fuel pump pulse).

40mm OD Manifold for Moflow "Bigger Valve" Heads

35mm OD Manifold for Moflow "Bigger Valve" Heads